Your location: Linear sand machine safety operation procedures
>Announcer:ROKED Machinery Release Time:3/14/2017 10:14:53 AM
Linear sand machine safety operation procedures
1, warning,
1.1 without permission anyone may not operate this equipment without authorization
2, preparation, before starting the boot before inspection
2.1 wear protective equipment according to regulations, wear protective masks.
2.2 clean up feed with sundry, check that the conveying pressure plate material shall be free of damage.
2.3 check the pressure feeding roller or flexible belt should be in good condition.
2.4 check whether the amount of oil in the oil mist detector is adequate, timely added.
2.5 through air to the gas supply to the machine, check the gas leakage and ruled out.
2.6 check reducer gear box should not leak.
2.7 installation according to the requirement for abrasive belt, adjust the firmness is appropriate.
3, boot, exception handling, boot operation
3.1 open the power master switch. Start the abrasive belt motor to operate smoothly,
1, warning,
1.1 without permission anyone may not operate this equipment without authorization
2, preparation, before starting the boot before inspection
2.1 wear protective equipment according to regulations, wear protective masks.
2.2 clean up feed with sundry, check that the conveying pressure plate material shall be free of damage.
2.3 check the pressure feeding roller or flexible belt should be in good condition.
2.4 check whether the amount of oil in the oil mist detector is adequate, timely added.
2.5 through air to the gas supply to the machine, check the gas leakage and ruled out.
2.6 check reducer gear box should not leak.
2.7 installation according to the requirement for abrasive belt, adjust the firmness is appropriate.
3, boot, exception handling, boot operation
3.1 open the power master switch. Start the abrasive belt motor to operate smoothly,
Related news
- How to lead on sanding machine…2016-11-14
- Furniture is the cause of medi…2017-03-20
- Woodworking line sanding machi…2016-11-14
- Grinding process has three mai…2017-05-16
- Sanding machine use skills2017-03-15
- Abrasive abrasive industry dev…2017-04-09
